- System-level Solution
- Dual IMU Redundancy and Built-in Black Box
- Expandable Navigation Module
- SDK Compatibility, More Possibilities
- Sport Mode
- Precision Fault-Tolerant Controls
- Software Support
DJI’s latest generation of the NAZA series, the N3 flight controller, is tailor-made for a multitude of hobbyist and industrial applications. Its robust flight control algorithm is ideal for controlling a broad range of industrial and DIY multirotor aircraft, providing professional stability.
The N3 flight controller is compatible with professional remote controllers and receivers, DJI’s Intelligent ESC, DJI GO, Lightbridge 2, Datalink Pro and iOSD. It also integrates seamlessly with DJI’s Zenmuse series of gimbals and cameras, providing instant access to a whole host of flight applications. Compatibility with DJI Assistant 2 provides more possibilities for a multitude of industrial applications. With DJI’s Onboard and Mobile SDK, the N3 is ideal for hobbyists and professionals looking to create custom software solutions quickly and easily.
Dual IMU Redundancy and Built-in Black Box
Dual IMU redundancy means that the N3’s robust flight control algorithm detects IMU failure during flight, automatically switching over to a backup unit while maintaining flight control and safety at all times.
The N3’s outstanding vibration dampening system supports a wide range of flying platforms — from lightweight consumer drones made for racing, to heavier industrial drones such as the S1000+ — providing better flight performance and better reliability.
A built-in 8GB Industry Black Box automatically records every detail of the aircraft’s flight, enabling you to monitor flight data and fine-tune the aircraft in real-time. With DJI’s Assistant 2 data viewer, troubleshooting and flight performance analysis have never been easier.
Expandable Navigation Module
The dual IMU redundancy system is upgradeable via the A3 Upgrade Kit, creating an IMU and GNSS redundant frame, boosting overall stability and reliability. It detects external GNSS or IMU unit failure, switching to internal units seamlessly to ensure consistently high-performance and safety.
SDK Compatibility, More Possibilities
Compatibility with DJI’s Onboard and Mobile SDK means the N3 is ideal for hobbyists and professionals looking to create custom software solutions with ease. The N3 works with DJI Assistant 2, providing more possibilities for a host of industrial applications.
Compatibility with DJI GO and DJI Assistant 2 allows live viewing of the video feed, battery status, redundancy status, signal strength and more. Shutter speed, ISO, aperture, and focus can be controlled when using DJI’s Zenmuse X5 and X5R cameras.
||400Hz frequency, DJI Intelligent ESC with feedback
||3S to 12S LiPo or DJI Smart Battery
||Lightbridge 2, S-BUS or D-BUS
|Other DJI Products Supported
||DJI GO, iOSD, DATALINK PRO, Zenmuse series, Ronin series, X3, X5, X5R, Z15, Ronin-MX, DJI propulsion systems, S900, S1000, S1000+, etc.
|Assistant Software System Requirement
||Windows 7 /8 /10 (32 or 64 bit)
- Sport mode, with adjustable maneuverability
- Intelligent Flight Mode
Dual IMU redundancy
- Built-in 8GB Sdcard for data recorder as Blockbox
- External SBUS receiver
- Lightbridge 2 receiver
- 8 function channels (including 4 configurable direction channels)
- Motor Fail Protection(Minimum 6 axis)
- Propulsion system Protection(Motor Overload)
- Smart Return To Home(RTH)
- Low Battery Protection, support Smart RTH(only for DJI Smart Battery)
- Low Battery Voltage Protection
- No Fly Zones
- MC： 46g
- Controller: 57.9mm x 39mm x 17mm
- PMU: 40mm x 28.2mm x 11.2mm
- LED: 25mm x 25mm x 6.3mm
- GPS-Compass: 50mm (diameter) x 12.2mm
||-10°C to +55°C
|Maximum Wing Resistance
|Max Yaw Angular Velocity
|Max Pitch Angle
|Max Ascending Velocity
|Max Aecending Velocity
|PWM I/O Ports
||F1-F4 ports for output F5-F8 ports for I/O function
||Built-in data recorder
|Intelligent Flight Modes
||Home Lock and Course Lock. (with Lightbridge 2) Point of Interest, Waypoints,
|Remote Parameter Adjustment
||Knob with sbus Receiver enabled by DJI ASSISTANT2 It can be realized in DJI GO APP With Lightbridge 2
||DJI ASSISTANT 2, support simulator
support MAC OS & windows
||iOSD Mark II, iOSD mini
||Z15, Ronin-MX, X3, X5,X5R