Matrice 210 Advanced Inspection Kit

DJI

CP.HY.000049


Kit Includes: 

  • 1x DJI Matrice 210
  • Zenmuse Z30
  • Zenmuse XT2 640 30Hz v2.0
  • 2x Cendence Remote Controllers
  • 2x CrystalSky 7.85" Monitors
  • 4x Propeller Sets (CW + CCW)
  • 2x TB50 Intelligent Flight Batteries
  • 4x TB55 Intelligent Flight Batteries
  • 4x Battery Insulation Stickers
  • 1x Battery Charger
  • 1x Charging Hub
  • 1x Power Cable
  • 1x USB Cable
  • 1x MicroSD Card
  • 1x Vision System Calibration Plate
  • 3x Gimbal Dampers
  • 1x Propeller Mounting Plates
  • 1x Rugged Wheeled Case

 

    The Drone Made for Commercial Endeavours 

    The DJI Matrice 200 is a drone built with enterprise users in mind. The drone leverages the Inspire 2’s platform builds on it to withstand harsher and more demanding conditions. The drone itself is rated IP43, making it weather and water resistant. The Matrice 200 also features a dual battery system to power the drone for a flight time of up to 35 minutes.

    The Matrice 200 is designed with advanced and innovative electronics which include computer vision intelligent flight modes that utilize DJI's FlightAutonomy system. The system enables the drone to detach and avoid objects in front, below, or above it for overall safer flights. The drone additionally features an onboard FPV camera so that operators can solely focus on just the piloting of the drone or the shooting of the drone.

    The Matrice 200 is compatible with the DJI’s Zenmuse camera series including the X4S, X5S, and Z30 as well as various XT cameras so that users can select the right camera for the job at hand.


    Three Different Versions

    The Matrice 200 series comes in three different versions: The Matrice 200, the Matrice 210, and the Matrice 210 RTK. The Matrice 200 can be equipped with one downward facing gimbal mount. The Matrice 210 can be equipped with multiple payloads. Users can equip the M210 with one downward facing mount, one upward facing mount, or two downward facing mounts. Finally, the M210 RTk will feature D-RTK modules for the most accurate flights possible.


    Weather Protection

    The Matrice 200 series comes with IP43 protection from dust and rain making it the perfect aerial platform to perform in harsher environmental conditions. The m200 series features more than 20 internal sensors for maximum reliability and redundancy in the air. These sensors include the IMU’s, barometers, and GPS system. The drone additionally features two stereo-vision systems in its back and front as well as an upward facing sensor for additional safety in the air.


    Range and Battery Life

    The Matrice 200 features a dual battery system. With two fully charged batteries, the Matrice 200 can fly for up to 35 minutes. The drones batteries are also self-heating for better battery health in colder temperatures. For added safety, if one battery fails the drone can still fly and safely land.

    With DJI’s Lightbridge technology the Matrice 200 can fly up to 7 km depending on the surrounding environmental conditions. The remote controller's range extends up 328 feet and users can easily switch between 2.4GHz or 5.8GHz for a clearer signal with less interference.


    Cameras and Payloads

    The Matrice 200 series can accommodate three different payload configurations. Users can mount the Zenmuse X4S, Zenmuse X5S, Zenmuse XT, or the Zenmuse Z30 to the drone. With multiple payloads and camera options, the Matrice 200 series is the perfect tool for commercial users looking to have a drone tailor-made for the job at hand.


    
Intelligent Flight Modes

    Using computer vision technology, the Matrice 200 can collect data more effectively and efficiently than ever before. The drone features multiple sensors that enable users to capture advanced shots quickly and easily.

    Spotlight: In Spotlight Mode pilots can have the drones camera lock onto a subject while flying the aircraft freely
    Point of Interest: In Point of Interest users can have the drone smoothly orbit around an object
    Tripod: Tripod Mode will slow down the drone so that users can shoot smoother footage in harder to navigate environments.
    ActiveTrack: With a simple tap users can have the drone lock onto a subject and follow it while keeping it centre frame.


    
DJI Go 4 App

    With the DJI Go 4 App users have complete control over all of the Matrice 200’s functions. Users can additionally plan flights through DJI;s Ground Station Pro app.


    
An Aerial Platform Made for Any Industrial Applications


    Infrastructure Inspections:

    Workers inspecting power lines, telecommunications towers, bridges, and more are all at risk to be put in potentially dangerous situations. With the Matrice 200 workers can stay out of harm's way and important inspections can be completed at a distance. Powerline operations can be monitored in detail, while vertical structures can be inspected from all different angles.


    
Energy Facilities:

    Inspections can be time and expense consuming but must be conducted to maintain high public safety standards. With the Matrice 200 users can easily identify and spot faults in buildings, roads, and bridges, or defects in equipment to optimize operations and improve efficiency.


    
Construction:

    Surveys and inspections are needed to help site managers, developers, and researchers on job sites review progress and workflow to ensure the most efficient use of resources possible. The Matrice 200 is capable of conducting surveys and inspections regardless of harsh weather conditions while keeping workers out of harm's way.


    
Public Safety:

    In the public safety sector every second counts. Emergency responders require a reliable and efficient aerial platform that can collect data, monitor conditions, and find victims to protect lives and minimize the risk placed on first responders. The Matrice 200 offers up a reliable and efficient way to conduct important surveys and inspections safely and effectively.